Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 24

Here are some of the basic indications which will appear on the Palmcorder EVF and
LCD Monitor. All indications except, the Date and Time, will NOT be recorded onto the
tape.
e f
a
b
C J
dJ
_-][]10 h 0 0 m 0 0 s 0 0_
-t_Z__Qj_aS] W_ R N I N GI
IVOLUME I-]l I)1------
12:34:56AM I
LJAN 2 2000
[÷}l
J
a. Battery Remaining
m
FULL
EMPTY
b. Tape Remaining
(AY-DVM30EA) (AY-DVM60EA)
Re:30 RI:00
!
!
- R0:O0- - R0:00-
i • L _,
• It will take several seconds for the tape
remaining indicator to operate after the
tape starts moving.
c. Digital Zoom and other Digital
Function (page 40)
This display appears when the digital
zoom function has been activated.
d. Playback Effect (page 44)
This display appears when SEPIA or
MONO is selected in VCR menu.
e. Tape Speed Indication (page 20)
Indicates the tape speed (SP or LP).
24
f°
Display On/Off and Counter/rime Code
The indication switches as shown below
when the desired "DISPLAY" mode is
selected from the menu (pages 21, 23).
• When selecting OFF, all displays
turned off.
Linear Time Counter Memory Counter
t
Time Code
Memory Counter M 0:00:00
The Palmcorder will stop whenever it
reaches the point where the counter was
previously set to M 0:00:00 during audio
dub, fast forward or rewind.
Time Code 0h00m00s00f
The Palmcorder calculates and displays
exactly where you are on any tape in terms
of hours, minutes, seconds, and frames
(30 frames = 1 second).
• This display can not be reset.
IMPORTANT NOTE:
Display must be set to ON for MF, AE,
W.BALANCE or BACK LIGHT indications to
be displayed on the EVF or LCD Panel
when selected.