Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 45

The Palmcorder automatically adjusts the focus over the entire zoom range.
Use Manual Focus (MF) when recording ...
• a subject through glass.
• a scene where the subject is far from the
Palmcorder and there are objects in the
foreground.
• a subject with distinct horizontal stripes.
• a subject not centered in the Viewfinder.
• subjects with shiny surfaces.
• an obliquely angled subject.
POWER ZOOM
Button
MANU
FOCUS control
wheel
Rotate O _ Press
• a bright, flat subject such as a white wall.
• in low light situations.
• a scene with fast motions, like a golf
swing.
• Re-focusing may be required
when your Palmcorder is aimed at a new
scene.
Press MANUAL FOCUS control
wheel so that "MF" (Manual Focus)
appears in the EVF or the LCD monitor.
EVF/LCD Monitor
2
Press and hold POWER ZOOM to the
"T" side (Full Telephoto) until the lens
is zoomed in all the way (subject at
maximum size).
Turn MANUAL FOCUS control wheel
until the picture is in focus.
• It may be necessary to back away
from the subject to focus the image
properly.
Press POWER ZOOM to "W" or "T"
as desired.
• The subject will remain in focus over
the entire zooming range.
• It may be necessary to back away
from the subject to focus the image
properly.
i_fi P.[H i[o] i[eIH ! !-1 i (o] ild [o].'-[;-_ ! | e_,,_ n
Press the "W" side of POWER ZOOM to the wide angle position.
Auto Focus will function with the subject as close as 1 inch (25mm) in front of the lens.
45