Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 30

To playback the final few seconds of the.
last recorded scene in the Recording
Pause Mode.
EDIT
SEARCH
You can visually search for scenes in
CAMERA mode to maintain proper
continuity when taping.
POWER Switch
Press EDIT SEARCH 4t_ briefly in the
recording Pause Mode.
The [CHK] indication appears.
After checking, the Movie Camera returns
to the Recording Pause Mode.
• For Recording Check, the Movie Camera
must be in the same mode (SP or LP) as
used for recording, otherwise the
playback picture is distorted.
1
¢HKI
Set POWER to CAMERA.
, The POWER lamp lights red.
o Be sure POWER is fully turned to
CAMERA position.
2
3
In RECORD/PAUSE mode, hold
down EDIT SEARCH I_ to
perform a forward visual search or
EDIT SEARCH _ to perform
a reverse visual search. Releasing the
button stops the search.
Press RECO_RD/PAUSE to continue
recording.
RECORD/PAUSE
Button
EDIT EDIT
SEARCH _ SEARCH I1_
o During Edit Search, the picture will have
a mosaic pattern. The sound wily be
muted when using reverse visual search.
o Make sure the SP/LP tape speed setting
is the same as the recording to eliminate
distortion during edit search.
3O