Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 14

To brighten the natural colors in a scene.
Built-in Light Mount
CZD i
Before you begin...
• Connect the Palmcorder to a power source
(pages 10, 11).
• Set POWER to CAMERA.
Slide Light into the Built-in Light
Mount.
Be sure it locks into place.
Press LIGHT ON.
LIGHT RELEASE
Button
LIGHT Button
Press LIGHT again to OFF.
To remove the Light:
Press LIGHT RELEASE and slide the Light
out of the mount.
Caution:
This light becomes hot during operation.
Make sure nothing covers the Light during
operation.
w
• Using the light will reduce battery operating time.
• If using the enhancement Light for an extended period of time, be sure to provide
ventilation when using it in a hot environment.
• Be sure LIGHT is set to OFF when not in use.
• Do not attempt to lift or carry the Palmcorder by holding the Enhancement Light.
• If light bulb needs to be replaced, take Light to your nearest authorized service center.
14