Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 37

JOG KEY
MENU
Button
INDEX
SEARCH --
(rewind)
Button
Panasonic c*.co¢=_. .
_M_ \ s_o_ pAusl
o o j
0
F*_ Flo_
INDEX
- SEARCH
(fast
forward)
Button
Top Scan
If you hold down the iNDEX SEARCH more
than 2 seconds, the Palmcorder will scan
for scenes (or PhotoShots) and playback
the first few seconds of each.
To cancel this function, press PLAY or
STOP.
/Index Forward/Reverse Search I
Optional Remote Control Only (page 58)
Search for a particular scene by using the
electronic index marks placed at the
beginning of each recording.
Set the POWER to VCR.
2
3
4
• The POWER lamp lights red.
• Be sure POWER is fully turned to
VCR position.
Press MENU to display the VCR
mode menu screen.
Rotate JOG KEY to select :
'. then press JOG KEY to
display the VCR PLAY MODE menu
screen.
Rotate JOG KEY to select :
and then press JOG KEY to select
PHOTO or SCENE.
1 Place the Palmcorder in the VCR STOP
mode.
2 Press INDEX SEARCH fast forward or
rewind the number of recordings
(indexes) forward or back you want to
view. The Palmcerder will advance or
rewind to the desired recording and
automatically PLAY.
• The number of times you pressed the
button is displayed in the EVF and the
LCD monitor if you set iNDEX on the VCR
menu to SCENE (page 22).
(Ex., if you press the button three times,
"$3" will appear.)
• If the interval between scenes is less than
1 minute, index search may not operate
properly.
• Response time between pressing the
button and change in the scene number
is quite slow. Do not press the INDEX
SEARCH rapidly and continuously.
• It won't playback when the tape reached
beginning during Reverse Index Search
mode.
37