Download Print this page

Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 5

Digital video camcorder
Hide thumbs Also See for Digital Palmcoder PalmSight PV-DV100:

Advertisement

15. Power Lines -- An outside antenna
system should
not be located
in the vicinity of overhead
power lines
or other electric light or power circuits, or where it can
fall into such power lines or circuits, When irrstalling
an outside antenna
system, extreme care should be
taken to keep from touching
such power lines or
circuits as contact with them might be fatal
16 Overloading
-- Do not ovedoad wail outlets and
extension cords as this can result in a risk of fire or
electric shock.
17. Objects and Liquids -- Never push objects of any
kind into this video unit through openings
as they
may touch dangerous
voltage points or short out
paris that could result in a fire or electric shock
Never spill liquid of any kind onto the video unit
18. Servicing -- Do not attempt to service this video unit
yourseif
as opening or removing covers
may expose
you to dangerous
voltage of other hazards
Refer all
servicing
to qualified service personnel.
19. Damage
Requiring Service -- Unplug this video unit
from the wall outlet and refer servicing
to qualified
service personnel
under the fo!lowing
conditions:
a When the power-supply
cord or plug is damaged.
b If any liquid has been spilled onto, or objects have
fallen into the video unit.
c
if the video unit has been exposed to rain or water
d If the video unit does not operate normally
by
following the operating
instructions.
Adjust only
those controls that are covered
by the operating
instructions,
as an improper
adjustment
of other
controls
may result in damage and will often
require extensive
work by a qualified technician
to
restore the video unit to its normal operation
e If the video unit has been dropped or the cabinet
has been damaged
f
When the video unit exhibits a distinct change in
performance
-- this indicates
a need for service.
20. Reptacement
Parts -- When reptacement
parts are
required,
be sure the service technician
has used
replacement
parts specified
by the manufacturer
or
have the same characteristics
as the original
part.
Unauthorized
substitutions
may result in fire, electric
shock or other hazards.
21
Safety Check--
Upon completion
of any service or
repairs to this video unit, ask the service technician
to
perform safety checks to determine
that the video
unit is in safe operating
order,
USE & LOCATION
• TO AVOID SHOCK HAZARD
,.. Your Camcorder
and power supply should not be exposed
to rain or moisture
Do
not connect the power supply or operate your Camcorder
if it gets wet. Your Camcorder
has been designed
for
outdoor use, however it is not designed
to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct
splashing
from a pool or even a cup of coffee. This action could permanently
damage
the internal parts of your
Camcorder
Do not attempt to disassemble
this unit. There are no user serviceable
parts inside. Unplug your
Camcorder
from the power supply before cleaning.
• DO NOT AIM YOUR CAMCORDER
AT THE SUN OR OTHER
BRIGHT
OBJECTS
• DO NOT LEAVE
THE PALMCORDER
WITH THE EVF AIMED DIRECTLY
AT THE SUN AS THIS MAY CAUSE
DAMAGE
TO THE INTERNAL
PARTS
OF THE EVF
• DO NOT EXPOSE YOUR CAMCORDER
TO EXTENDED
HIGH TEMPERATURE
... Such as, in direct sunlight,
inside a closed car, next to a heater, etc...
This action could permanently
damage
the internal parts of your
Camcorder
• AVOID SUDDEN
CHANGES
IN TEMPERATURE
... If the unit is suddenly moved from a cold p_ace to a warm
place, moisture may form on the tape and inside the unit
• DO NOT LEAVE
YOUR CAMCORDER
OR THE POWER SUPPLY
TURNED
ON WHEN NOT IN USE.
• STORAGE
OF YOUR CAMCORDER
... Store and handle your Camcorder
in a manner that will not subject it to
unnecessary
movement
(avoid shaking
and striking)
Your Camcorder
contains a sensitive
pick-up device which
could be damaged
by _mproper handling
or storage.
CARE
• TO CLEAN
YOUR CAMCORDER
... Do not use strong or abrasive detergents
when cleaning your Camcolder
body
• TO PROTECT
THE LENS ... Do not touch the surface of the lens with your hand
Use a commercial
camcorder
lens solution and lens paper when cleaning
the lens. Improper
cleaning can scratch the lens coating.
• TO PROTECT
THE FINISH OF YOUR CAMGORDER
... Before handling
your Camcorder,
make sure your hands
and face are free from any chemical
products, such as suntan lotion, as it may damage the finish
5

Advertisement

loading