Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 63

k ' j
Clogged Video
Head
(a) Video Head Cleaning: Normally, your Palmcorder will not
require head cleaning. However, it is possible that the heads
may become clogged due to dust in the air, damaged tape,
long term use, etc. If "NEED HEAD CLEANING" appears for 5
seconds in the EVF or LCD monitor, the heads may require
cleaning.
(b) Cleaning the Heads: It is recommended that head
cleaning be performed by a qualified service technician.
Please contact your nearest Panasonic Service Center. An
alternate solution is to obtain a head cleaning cassette. Please
use Panasonic cleaning cassette (AY-DVMCL). Be sure to
follow the cleaning instructions carefully. Excessive use of the
cleaning cassette could shorten head life.
Use this cassette only when a head clogging symptom occurs.
Refer servicing to qualified service personnel.
• When you go from function to function (PLAY, FF, REW etc.), please note that the unit
will not accept a new function operation until the previous operation is complete.
• The POWER Button, and all function buttons, (PLAY, FF, REW, etc.) are only operational
after the tape has been completely loaded.
• With a Wide or Telephoto Conversion Lens (optionaL) attached, the four corners of the
screen may darken when zoom is set to maximum wide angle.
• Attaching the lens hood, a Wide or Telephoto conversion lens (optional), etc. after a filter
(optional) has been attached, the four corners of the screen may darken when zoom is
set to maximum wide angle.
• With two filters (optional) attached, the four corners of the screen may darken when
zoom is set to maximum wide angle.
63