Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 53

An image stored in the DV Tape can be transferred to your PC (Personal Computer).
• IBM PC/AT or compatible.
• Intel® Pentium ® Processor
• Microsoft Windows ® 95 or Windows ® 98
• RAM: 16 MB or more
• 2 MB minimum available hard disk
space.
• 256 color monitor (full color
recommended).
• 3.5 inch 1.44 MB floppy disk drive
(for installation).
• RS-232C serial port (D-Sub 9-pin).
An adaptor (D-Sub 9-pin male to a
D-Sub female) is required for a D-
Sub 25-pin.
• Mouse or other pointing device.
To PC Connector
RS-2320
(D-Sub 9-pin)
(Default is COM1.)
2
PC Connecting
Cable for Windows
(Supplied)
Turn off your PC.
Connect the Digital Video Camcorder to your PC (Windows) using
the RS-232C PC connecting cable (supplied).
• Before connecting the Palmcorder to the PC, make sure the PC
power is off to insure that images are transferred properly.
Turn on your PC.
Set the Palmcorder POWER to VCR.
IBEt
• For extended periods of use, it is recommended to use the AC Adaptor
as a power source.
• Refer to PC or Windows manual to identify which COM port to be used
for connection:
53