Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 40

You can gradually zoom in for close ups or
zoom out for wide angle shots.
Zoom slowly : By lightly pressing the "T"
(Telephoto) or the "W"
(Wide Angle) side of the
POWER ZOOM Switch.
Zoom quickly • By applying more
pressure.
The zooming speed ranges from a slow 22
seconds to a fast 2 seconds according to
the amount of pressure applied to the
POWER ZOOM Switch.
POWER
POWER
J Switch
Camera mode
Set POWER to CAMERA.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
CAMERA position.
Press D. ZOOM to select D.ZOOM1 or
D.ZOOM2.
3
4
once : D.ZOOM1 (from 18x to 36x)
twice : D.ZOOM2 (from 18x to 300x)
three times • Turn off D.ZOOM
Press REC/PAUSE to start
recording and press POWER ZOOM to
zoom in or zoom out.
• The magnification level is always
displayed in the EVF or the LCD
monitor when DISPLAY is set to ON
(pages 21, 23)
Press D.ZOOM to turn off Digital
Zoom so that no indication appears.
Igrm l
MENU Button
Zoom In ("T")
.. o.zpoMl_, \
<
• The normal optical zoom functions from
lxto 18x.
• Because the image is enlarged digitally,
the picture may become distorted when
higher magnification levels are used.
• When the level falls below 18x, the
normal zooming function will resume.
• Focus distance becomes 4 feet (1.2m) if
the lens is in full telephoto.
Zoom Out ("W")
D. ZOOM Button PLAY Button
1
• Digital Functions are turned off ,_
automatically when the EIS and Digital
"I'
Zoom are selected.
4O
( VCR mode
Set POWER to VCR.
• The POWER lamp lights red.
,, Be sure POWER is fully turned to
VCR position.
Press PLAY to start playback.
Press B.ZOOM
• The center portion of the image
doubles in size.
Press D.ZOOM again for normal
image size.