Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 31

You can go directly to a blank portion of
tape and start recording exactly where you
left off.
JOG KEY
Button
POWER Switch
Set the POWER to VCR.
2
3
4
• The POWER lamp lights red.
• Be sure POWER is fully turned to
VCR position•
Press MENU to display the VCR
mode menu screen.
Rotate JOG KEY to select
• then press JOG KEY to
display the VCR PLAY MODE menu
screen.
Rotate JOG KEY to select
in the VCR PLAY MODE me=_u (page
23).
Press JOG KEY to select ON.
• "BLANK" will appear on the screen•
You can operate the major functions of your Palmcorder from up to approximately 16 feet
(5 m) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder and
press the desired buttons (Remote Sensor is located under the lens)•
To operate Camera functions:
Set POWER to CAMERA.
To operate VCR functions:
Set POWER to VCR.
ZJ 5
b ,
"! /
•1
Remote Sensor
,/
I
/
/
Controlled Functions
Rec/Pause (page 28)
Tele (Zoom) (page 40)
Wide (Zoom) (page 40)
Date/Time (page 25)
Reset (page 49)
PhotoShot (page 41)
Display On TV(page 38)
Counter/Time Code (pages 24)
Audio Dubbing (page 48)
Record (page 51)
Menu (page 18)
Play (page 33)
FF/Search (page 34)
REW/Search (page 34)
Pause/Select (pages 18, 34)
Stop/Set (pages 18, 33)
Slow/Frame Advance (Forward) (pages 34, 36)
SLow/Frame Advance (Backward) (pages 34, 36)
Index Search (Forward) (page 37)
Index Search (Backward) (page 37)
Speaker Volume (page 33)
31