Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 39

The feature helps to compensate for any
unitentional hand or body movement. It can
be used in both the Recording and
Playback (VCR) modes.
EIS ON
POWER
EIS Button
REC/PAUSE
Button
PLAY Button
Camera mode 1
Set POWER to CAMERA.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
CAMERA position.
Press EI S to stabilize the picture.
• Picture flicker may be observed when
taping under fluorescent lighting
conditions.
• The EIS indicator flashes when the
light level is inadequate.
• Turn D.EJ.S. OFF during recording
when using a tdpod.
Press REC/PAUSE to start recording.
Press EIS again to cancel.
• Be sure that D.E.I.S. is turned off
when not needed.
D.E.I.S. may not function when...
° Palmcorder movement is too
extreme.
o Recording a subject with distinct
horizontal or vertical stripes.
Recording in low light situations.
• Recording a subject under a great
amount of fluorescent light.
• Recording a scene with very fast
motions.
I VCR mode
1
, Digital Functions are turned off
automatically when the EIS and Digital
Zoom are selected. A
"11'
Set POWER Switch to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
VCR position.
Press PLAY to start playback.
Press EI S to stabilize the picture.
Press EIS Button again to cancel.
,, Be sure that D.E.I.S. is turned off
when not needed.
When using.D.E.l.S in VCR mode, the
size of the scene may appear slightly
larger.
39