Troubleshooting With Led/Lcd Indications And Status Monitor 3 Message - Epson R200 - Stylus Photo Color Inkjet Printer Service Manual

EPSON Stylus Photo R200/R210

1.2 Troubleshooting with LED/LCD Indications and Status Monitor 3 Message

This section describes the LED/LCD indication, the STM3 message and the error condition when the printer detects an error in each operation such as the power on, the paper
loading/feeding and the ink absorption operation. (As for the screen shot in STM3 message, it's used screen shot of Stylus Photo R300/310 as a substitute for that of Stylus Photo
R200/210.)
Printer status
Power
Communication Error --
Error before Initial Ink
Blink
Charge
TROUBLESHOOTING
Table 1-3. LED Indication and STM3
LED indication
Paper Ink
-- --
-- On
Troubleshooting with LED/LCD Indications and Status Monitor 3 Message
STM3 message
This error is detected when the printer cannot
communicate with the PC properly.
This error is detected when a defective cartridge
is installed in the printer which the Initial Ink
Filling is not done yet.
Revision A
Condition for error detection
9