Placing originals in the optional document processor
NOTE: The original may not be scanned correctly if original set direction is not specified.
1
Press the Scanner Function key.
2
Press [ ] or [ ] to select Orig. Direction, and then press the OK key.
3
Press [ ] or [ ] to select Top Edge Top or Top Edge Left, and then press the OK key.
4
Press [ ] or [ ] to select End, and then press the OK key.
Continuous Scan
After scanning an original, you can continue scanning a new original. When this feature is enabled,
after an original is scanned, a selection screen prompts whether to continue scanning originals.
Item
On
Off
NOTE: For TWAIN image scanning, batch scanning is available when Wait for Scan is enabled.
1
Press the Scanner Function key.
2
Press [ ] or [ ] to select Continuous Scan, and then press the OK key.
3
Press [ ] or [ ] to select On or Off, and then press the OK key.
4
Press [ ] or [ ] to select End, and then press the OK key.
Output Per Page
Creates and sends a separate file for each page of a scanned original.
Item
On
Off
1
Press the Scanner Function key.
2
Press [ ] or [ ] to select Output Per Page, and press the OK key.
3
Press [ ] or [ ] to select On or Off, and then press the OK key.
Original
[
Top Edge Top
Description
Enables continuous scan.
Disables continuous scan.
Description
Enables Output Per Page.
Disables Output Per Page.
[
]
Top Edge Left
Scanner Settings
]
1-7