Kyocera TASKalfa 181 Operation Manual page 64

Included Scanner Utilities
Basic - Black and White mode
The setting items are as follows.
Setting Item
File Type
Orig. image
quality
Basic - Universal mode
The setting items are as follows.
Setting Item
Resolution
Multiple Scanning OFF, ON
File Name
Extension
The setting items are as follows.
Setting Item
Full scan
Uncompress
scanning
Continuous
sending
Skip sender (user)
select
3-20
Value
TIFF/PDF
Photo/Text/Text+Photo/OCR
Value
600dpi, 400dpi, 300dpi, 200dpi
Enter the filename using less than 16
characters.
Value
ON, OFF
ON, OFF
ON, OFF
ON, OFF
Description
Specify the file type when saving a
scanned image.
Select from the following four modes
depending on the type of original being
scanned.
Description
Select from the following four
resolutions to scan an original.
Select whether to scan originals in a
continuous operation.
Specify the name used when saving
scanned images.
Description
Scan the original that is filled its corner
with the contents, a photo and so on. If
this function is set to On in the initial
mode, all of the originals will be
scanned with Full scanning.
When compressing the dots such as in
photographs, the resulting data
volume may actually be greater than
before it was compressed. Select
whether or not to have compression
performed automatically in cases such
as these when the compressed data is
greater that the original data.
Use the same settings from a
previously completed transmission for
the next transmission. The scan
function screen is returned with the
sender (user), destination and other
settings remaining from the previous
operation.
When using this scanner, a sender
(user) must be first selected. Set to ON
to force the sender (user) to User No.
001 and skip sender (user) selection.