Kyocera TASKalfa 181 Operation Manual page 29

NOTE: IP-Filters can be configured for Address Editor as well.
1 Enter the scanner's IP address into the Web browser to show the scanner home page.
2
Click System Basic Setting at the left side of the screen.
3 Click IP-Filters.
4 Check the box to the left of the protocol
name to enable filtering for that protocol.
5
Up to 4 IP address ranges can be enabled for filtering. To filter a single IP address, only enter the
Starting Address.
6
Click the Registration button.
NOTE: The setting shown in the screen
only allows access from the IP address
range 10.10.10.1 - 50 and from IP
address 10.10.10.125 to the scanner's
home page (HTTP) and Address Editor.
Setting Scanner from a Web Browser
2-9