File Names - Kyocera TASKalfa 181 Operation Manual

Scan system (f) b
Hide thumbs Also See for TASKalfa 181:
Table of Contents

Advertisement

File Names

When saving data files at the computer, the details configured in advance from the web browser are
added to the filename (character string less than 16 characters + file extension). If not specified, the
filename will be automatically determined based on predefined rules. The file naming convention for
automatic naming is as follows.
Filename: *******nnnn_mmm.Extension
Text String
Description
*******
Filename stored in each scanner.
nnnn
Indicates the document scan number, represented by a 4 digit number between
0000 - 9999.
mmm
Used for each page when saving an original with multiple pages, represented by
a 3 digit number between 0 - 999.
Extension
Extension is automatically assigned by Scanner File Utility depending on the file
type.
IMPORTANT: When the number for the auto-naming rule conflicts with a same file name range or
same file name, and the Setup dialog box Permit File Overwrite is checked (see page 3-7), the
older existing files is overwritten by newly saved files.
About Image Data
File Type
TIFF and PDF formats are supported.
Image data size
Standard sizes: A3, A4, A5, B4, B5, B6, 11 × 15", Folio, 11 × 17", 8
5
× 8
", 8
× 13", 8K, 16K
1/2
1/2
1/2
Non-standard sizes: 50 - 432 mm (17") width, 50 - 297 mm (A4 Long) height.
NOTE: When receiving multiple page image data, the import size cannot be modified for each
individual page. (Except when Batch scanning is set)
Resolution (DPI)
The four resolutions of 200 × 200 dpi, 300 × 300 dpi, 400 × 400 dpi, 600 × 600 dpi are
supported.
NOTE: When receiving multiple page image data, the resolution cannot be modified for each
individual page. (Except when Batch scanning is set)
If a hard disk error occurs
If the hard disk runs out of available space during receiving image data from the scanner, reception
of subsequent images will be aborted and image data received up to that point will be lost.
IMPORTANT: Caution when the icon color changes to yellow!
If the used space of the hard disk reaches the preconfigured warning percentage, the Windows
taskbar icon will change to yellow to alert this condition to the user. If this occurs, free up space on
the hard disk by deleting unnecessary files or moving data to other media.
Included Scanner Utilities
× 11", 8
× 14",
1/2
1/2
3-11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 221

Table of Contents