How To Set Job Accounting - Kyocera TASKalfa 180 Operation Manual

Job Accounting

How to set Job Accounting

Set Job Accounting to enable or disable it.
6-8
Job Accounting:
01.JobAccounting
1
Display Job Accounting. (Refer to Job Accounting
Operation Procedures on page 6-3.)
2
Press or to select display
01.JobAccounting, and then press the OK key.
3
Press or to select On when Job Accounting
is to be used and Off when it will not be used, and
then press the OK key.
The display will return to that of Step 2.
OPERATION GUIDE