Document Processor; Paper Feeder; Duplex Unit - Kyocera TASKalfa 180 Operation Manual

Document Processor

Paper Feeder

Duplex Unit

OPERATION GUIDE
Automatically scans originals. Also you can perform
duplex copying and split copying.
For document processor operation, refer to Loading
Originals in the Document Processor on page 2-14.
In addition to the cassette(s) provided with the main
body, a paper feeder (with cassettes that can hold 300
sheets each) can be used.
• The number of sheets that can be accommodated:
300 sheets (standard paper, 64 to 105 g/m²).
• Paper sizes that can be set are: A3, B4, A4, A4-R,
B5, B5-R, A5-R, Folio, 11 × 17" (Ledger), 8
(Legal), 11 × 8 ", 8
1/2 1/2
(Statement), 8 × 13" (Oficio II), 8K, and 16K
1/2
Copy paper can be set in the same way as the standard
cassette provided with the main body.
IMPORTANT: When lifting and transporting this
machine, be sure to detach the paper feeder in
advance.
NOTE:
• Left cover 4 is located on the left side of the paper
feeder for use in clearing paper jams.
• Up to three cassettes can be added for the both 18
ppm model and 22 ppm model.
Two-sided copies can be made if the duplex unit is
installed. Two-sided copies of sizes from A3 to A5-R,
Folio, 11 × 17" (Ledger) to 5
8K, and 16K (64 to 80 g/m²) can be made.
× 14"
1/2
× 11" (Letter), 5 × 8 "
1/2 1/2
× 8 " (Statement),
1/2 1/2
Appendix-3