Original Image Quality; Text Density Adjustment; Processing To Reduce Black Lines - Kyocera TASKalfa 180 Operation Manual

System Menu

Text Density Adjustment

Adjusts the median density value of the copy for the Text original.

Processing to Reduce Black Lines

It is possible to make black lines less noticeable when they appear when using the optional Document
Processor. Using processing to reduce black lines decreases the reproduction quality of small characters, so it
is recommended that the copier normally be used at the factory default setting.
NOTE:
When Photo Mode has been selected in Image Quality Mode, processing to reduce black lines is not
possible.

Original Image Quality

Sets the original image quality that will be selected at the time the copier is turned on.
5-12
System Menu:
10.Text Density
System Menu:
03.Image Quality
System Menu:
11.ReduceStreaks
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press to select select 10.Text
or
Density, and then press the OK key.
3
Press to select an density from 1 to 7, and
or
then press the OK key.
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press o select select 03.
or
Quality
, and then press the OK key.
3
Press to select Text+Ph Dens, Photo
or
Density or Text Density, and then press the
OK key.
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press or to select select
11.ReduceStreaks, and then press the OK key.
Image
OPERATION GUIDE