Auto Cassette Switching; Auto Sizing; Entering Custom Sizes - Kyocera TASKalfa 180 Operation Manual

Auto Cassette Switching

When the optional Paper Feeder has been installed, select whether or not to use the Auto Cassette Switching
function.
System Menu:
17.AutoCassetSel

Auto Sizing

Sets whether or not to use automatic sizing (zoom/reduction percentage) when a paper cassette has been
selected.
System Menu:
18.PriorAutoZoom

Entering Custom Sizes

Sizes that are not displayed on the Operation Panel are registered as Custom Sizes.
The setting of Custom Size 1 is shown here as an example. To set Custom Size 2 select 25.Custom Size 2 in
the System Menu and then perform the same settings.
System Menu:
24.Custom Size1
OPERATION GUIDE
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press or to select select
17.AutoCassetSel, and then press the OK key.
3
Press to select Disting. paper when
or
the Auto Cassette Switching function is to be used
and Not disting. when it will not be used, and
then press the OK key.
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press to select select
or
18.PriorAutoZoom, and then press the OK key.
3
Press to select On when the Automatic
or
Sizing function is to be used and Off when copies
are to be made using a 1:1 ratio, and then press the
OK key.
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press to select select 24.Custom
or
Size1, and then press the OK key.
System Menu
5
5-15