Checking The Total Counter; Digital Dot Coverage Report - Kyocera TASKalfa 180 Operation Manual

Alarm
The Alarm can be set to sound when a key on the Operation Panel is pressed or in cases when errors occur, etc.
System Menu:
55.Alarm

Digital Dot Coverage Report

Print the report that shows the number of copies made and the average concentration of toner used for each
paper size.
NOTE:
Check to make sure that Letter/A4 size paper is loaded in the cassette.
System Menu:
56.CoverageRepo

Checking the Total Counter

The Total Count can be viewed on the Operation Panel. A Counter Report can also be printed.
OPERATION GUIDE
NOTE:
This can be set when the Auto Sleep setting
has been set to On. (Refer to Auto Sleep Setting on
page 5-21.)
The time intervals that can be set are 1, 5, 15, 30, 45,
60, 90, 120, 180 and 240 minutes.
4
Press the OK key.
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press to select select 55.Alarm, and
or
then press the OK key.
3
Press or to select On in the case where the
transition to Auto Clear is to be made or Off when
it is not, and then press the OK key.
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press to select
or
and then press the OK key.
3
Press or to select Yes, and then press the
OK key.
The report will be output and the display will return
to that of Step 2.
System Menu
56.CoverageRepo ,
5-23
5