Making Copies In Job Accounting Mode - Kyocera TASKalfa 180 Operation Manual

Making copies in Job Accounting Mode

When Job Accounting is being carried out "= = =" will be displayed in the No. of Copies display and copy
operations can be carried out by entering the assigned Department ID Codes using the numeric keys.
IMPORTANT: Always remember to press the Logout key after completing copying.
OPERATION GUIDE
1
Confirm the ID code to be deleted and then press
the OK key.
"1" will be displayed on the No. of Copies display.
NOTE:
When an error has been made in input, press
[Stop/Clear] and input the data again.
When the Department ID Code that is input does not
match any of the Department ID Codes registered,
Illegal Account. is displayed and the copier
returns to the "= = =" display. Input the correct
Department ID Code.
2
Carry out regular copy operations.
3
Press the Logout key after completing copying.
"= = =" will be displayed on the No. of Copies
display.
Job Accounting
6
6-9