Additional Management And Configuration Tasks - HP StorageWorks 1510i - Modular Smart Array User Manual

1.
Select Management Port > Set SSL Certificate.
2.
Expand the SSL Certificate Type drop-down box and select Upload PEM Certificate.
3.
Enter the requested information.
Additional management and configuration tasks
In addition to the tasks already described, the following tasks are also available:
• Adding a route (Add Route)
• Changing array or logical drive characteristics
• Disabling the array accelerator (Array Accelerator Settings)
• Expanding an array (Expand Array)
• Extending a logical drive (Extend Logical Drive)
• Migrating to a different RAID level or stripe size (Migrate RAID/Stripe Size)
• Changing global settings (Storage System Settings)
• Changing target login parameters (Set Login Parameters)
• Clearing the configuration (Clear Configuration)
• Deleting a component (Delete)
• Disabling auto-path switching (Redundancy Settings)
• Disabling data ports (Enable/Disable Port)
• Disabling a controller (Disable Controller)
• Enabling iSNS discovery
• Enabling iSNS discovery (iSNS Discovery Settings)
• Enabling iSNS discovery of specific targets (Discovery Settings)
• Identifying devices (Identify Device)
• Refreshing the display (Refresh System)
• Resetting the system (Reset System)
• Setting the preferred path (Preferred Path)
• Viewing detailed component information (More Information)
• Viewing status alerts (View All Status Alerts)
HP Storage Management Utility user guide
57