Conﬁguration Status - After Creating Storage Targets - HP StorageWorks 1510i - Modular Smart Array User Manual

Active/active firmware v2.x

Hide thumbs Also See for StorageWorks 1510i - Modular Smart Array:

Table of Contents

Select the newly created Portal Group > Assign Portals. Expand the Port Name drop-down box and

select a port on the redundant Ethernet iSCSI module for this target portal group to use. After the

portals associated with the selected logical port are displayed, select the TCP portals to use.

Conﬁguration status - after creating storage targets

Figure 12

illustrates the current conﬁguration.

The following items are conﬁgured:

•

Management port MA0 and MB0

•

Data ports SA0, SA1, SB0, and SB1

•

Physical hard drives, into arrays and logical drives

•

Targets

• Target 1

• Target 2

• Target 3

Conﬁgure

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the StorageWorks 1510i - Modular Smart Array and is the answer not in the manual?

Storage management utility