Sample Configuration Used In This Document; Sample Configuration-Device And Cabling Diagram - HP StorageWorks 1510i - Modular Smart Array User Manual

Sample configuration used in this document
Illustrations in this document demonstrate the process of configuring a dual-controller MSA1510i storage
system, with multiple targets being accessed by multiple initiators. Although each real-world environment
and the associated configuration steps will differ from this example, fundamental principles of the
configuration steps are the same for all installations. Your configuration may be more or less complex, but
the configuration steps will be similar to the steps outlined in this document.
The following diagrams illustrate the sample configuration used throughout this document:
• Sample configuration-Device and cabling diagram
• Sample configuration-physical-to-logical storage diagram
• Sample configuration-Path/accessibility diagram
Sample configuration—Device and cabling diagram
15K
15K
3
1
Item
1
MSA1510i controller shelf
MSA20 SATA storage
2
enclosure
Primary Ethernet network
3
switch
Redundant Ethernet network
4
switch
5 Initiator A
6 Initiator B
7 Initiator C
30
Configure
5
15K 15K
15K 15K
Description
Sample includes two array controllers and two 2-Port Ethernet iSCSI modules.
Sample includes twelve SATA hard drives.
Sample supports 100/1000BaseT functionality.
Sample supports 100/1000BaseT functionality.
Sample includes two 100/1000BaseT Ethernet NICs and cabling to the two
network switches.
Sample includes two 100/1000BaseT Ethernet NICs and cabling to the two
network switches.
Sample includes two 100/1000BaseT Ethernet NICs and cabling to the two
network switches.
6
15K 15K 15K
15K 15K 15K
7
15K 15K 15K
15K 15K 15K
4
2
15292