Scanner base assembly removal
1.
Remove rear cover.
2.
Remove the modem card. See
3.
Disconnect the operator panel cable (A) from J5 on the controller card.
4.
Disconnect the 18 and 22 pin ribbon cables (B) from connectors J1 and J4 on the controller card.
5.
Disconnect the ADF cable from connector J3 on the controller card.
6.
Remove the modem card. See
See"Rear cover removal" on page
"Modem card removal" on page
"Modem card removal" on page
4-5.
4-54.
4-54.
Repair information
7003-XXX
4-51