Fuser Idle Gear Links Removal - Lexmark X342N - Multi Function Printer Service Manual

Fuser idle gear links removal

1.
Remove the front access cover. See
2.
Remove the left side cover. See
3.
Place MFP on its right side. Protect the cover from being marred.
4.
Remove the four screws (A) securing the gear train cover.
5.
Remove the gear train cover.
6.
Grasp the rear link with your index fingers and thumb on each side of the shaft, and unsnap the link (B)
from the shaft.
7.
Disconnect front link from coupler, and remove links.
"Front access cover removal" on page 4-2
"Left side cover removal" on page
7003-XXX
for more information.
4-3.
Repair information
4-21