Vf Connector - Sony Digital Betacam DVW-707 Maintenance Manual

3-3-2. VF Connector

1. Pull the plug-in boards (DCP and DVP board
assemblies) out. (Refer to the Maintenance
Manual Part 1, Section 1-9.)
2. Remove the CCD unit. (Refer to Section "3-
2-1. Replacing the CCD unit".)
3. Untie the harness from the coating lead pin,
and then disconnect the harness from the
connector (CN23) on the MB-811 board.
4. Remove the two precision screws, and then
pull the VF connector out.
5. Reattach the VF connector by reversing the
removing steps.
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
VF connector
Precision
P 2.6x5
Direction of
the VF connector
when attached
3-3. Replacing the External Connectors/Switches
Coating lead pin
MB-811 board
CN23
3-19