Using The Extension Boards; Using The Ex-655 And Ex-656 Boards - Sony Digital Betacam DVW-707 Maintenance Manual

1-2. Using the Extension Boards

1-2. Using the Extension Boards
The extension boards for the plug-in boards check are
available separately as spare parts.
See the table below to extend applicable board :
Board to be Extension board
checked
DCP board assembly
(side A) EX-655 and EX-656
(side B) EX-657
DVP board assembly
(side A) EX-655 and EX-656
(side B) EX-658
SV-210 board EX-667
DC-DC converter
DIF-75 board
(BKDW-702)

1-2-1. Using the EX-655 and EX-656 Boards

The EX-655 and EX-656 boards are always connected and
used in a pair.
To check/adjust the side A of the DCP and DVP board
assemblies, use these extension boards.
These boards are intended for the following use:
. EX-655 Board+EX-656 Board :
For the side A of the DCP/DVP board assembly check
1-4
Procedure
1. Connect the EX-656 board to the EX-655 board.
Reference
Section 1-2-1
Section 1-2-2
Section 1-2-1
Section 1-2-2
Section 1-2-3
2. Slide in the two supplied supports (DP3) between the
EX-655 board and the EX-656 board so that the protru-
sion of the support insert in the slot of the EX-656 board.
3. Secure the supports (DP3) using the two supplied
screws from the EX-655 board side.
Support (DP3)
(supplied
accessory)
Support (DP3)
M 2x4
EX-656 board
EX-655 board
EX-656 board
M 2x4
(supplied accessory)
DVW-790WSP/709WSP/707P P2V1
M 2x4
(supplied
accessory)
Support (DP3)
(supplied
accessory)
EX-655 board
DVW-790WS/709WS/707