Cue Brush Replacement For Cue Head - Sony Digital Betacam DVW-707 Maintenance Manual

4-2-7. CUE Brush Replacement for CUE Head

Overviews
Replacement
Mode Selection
Manual Eject Assembly Removal
CUE Brush Replacement
Manual Eject Assembly Installation
Operation Check
Note
The adjustment after replacing is not needed.
Preparations
1. Turn the power off.
2. Remove the front lid and the outside panel. (Refer to section 1-6 of Maintenance Manual Part 1.)
n
The stop washer has been used together with the CUE brush when attaching the CUE brush. When replacing
the CUE brush, prepare a new stop washer (3-321-393-11) and use it when attaching the CUE brush.
Removal
1. Mode Selection
Check that the unit is in the unthreading end mode.
2. Manual Eject Assembly Removal
Remove the manual eject assembly. (Refer to section 4-1-3.)
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
4-2. Parts Replacement
4-35