Pinch Arm Assembly Replacement - Sony Digital Betacam DVW-707 Maintenance Manual

4-2-17. Pinch Arm Assembly Replacement

Overviews
Replacement
Pinch Arm Assembly Removal
Installing Shafts Cleaning
Applying Oil to Installing Shafts
Pinch Arm Assembly Installation
Pinch Roller Cleaning
Adjustment after replacement
Tape Running Adjustment
Note
Replacement of pinch arm assembly requires two new stop washers and the E-ring. When replacing the real
table, prepare two new stop washers and the E-ring.
Stop washer 1.2 : 3-726-829-01 (2 pieces are used.)
E-ring 1.2 : 7-624-101-01 (1 piece is used.)
Preparations
1. Check that the unit is in the unthreading end mode.
2. Turn the power off.
3. Remove the front lid and the outside pane. (Refer to section 1-6 of Maintenance Manual Part 1.)
4. Remove the cassette compartment. (Refer to section 1-8 Maintenance Manual Part 1.)
Tools
. Stop washer fastening tool
. Cleaning cloth
. Cleaning fluid
DVW-790WS/709WS/707 P2V1
DVW-790WSP/709WSP/707P P2V1
: J-6323-530-A
: 3-184-527-01
: 9-919-573-01
4-2. Parts Replacement
4-77