Reel Table Replacement - Sony Digital Betacam DVW-707 Maintenance Manual

4-2-16. Reel Table Replacement

Overviews
Replacement
Reel Table Removal
Reel Shaft Cleaning
Reel Table Cleaning
Reel Table Installation (1)
Reel Table Height Adjustment
Reel Table Installation (2)
Operation Check
Adjustments after replacement
FWD Back Tension Adjustment
Brake Torque Check
Tape Running Adjustment
Notes
. Replacement of real table requires the new stop washer. When replacing the real table, prepare a new stop
washer.
Stop washer 1.2 : 3-726-829-01 (1 piece is used.)
. The each five poly washers are attached at the top and bottoms of the S reel table and the T reel table.) The
poly washers at the top of the reel table are the spare parts the reel table replacement. Take care not to lose
or break.
Poly washer (0.13 mm thick) : 3-303-961-01
. The height of the S and T reel tables are to be made the reference for the tape running system. After
replacing the S or T reel table, be sure to carry out the S or T reel table height adjustment.
Preparations
1. Check that the unit is in the unthreading and mode.
2. Turn the power off.
3. Remove the front lid and the outside panel. (Refer to section 1-6 of Maintenance Manual Part 1.)
4. Remove the cassette compartment. (Refer to section 1-8 of Maintenance Manual Part 1.)
DVW-790WS/709WS/707 P2V1
DVW-790WSP/709WSP/707P P2V1
4-2. Parts Replacement
4-73