Mechanical Deck Replacement - Sony Digital Betacam DVW-707 Maintenance Manual

4-2-26. Mechanical Deck Replacement

1. Removing the Mechanical Deck
(1) Remove the outside panel.
(2) Remove the four screws and remove the me-
chanical deck.
2. Attaching the Mechanical Deck
(1) Hold the sportion of the cassette compartment
that is shown by shading in the illustration, or
the cassette guide, and the HN-260 board.
Then, align the two holes of the mechanical
deck assembly with the two pins on the chas-
sis, and attach the mechanical deck to the chas-
sis.
(2) Press the ornamental panel of the HN-260
board firmly downward, and connect the 100P
connector to the mother board.
(3) Tighten the four screws of the mechanical
deck assembly.
The standard tightening torque value :
19 x 10
DVW-790WS/709WS/707 P2V1
DVW-790WSP/709WSP/707P P2V1
_2
N.m {1.9 kgf.cm}
100P connector
HN-260 board
Cassette guide
Cassette
compartment
arm
Screws
(with drop-safe)
100-pin connector
HN-260 board
Cassette guide
Cassette
compartment
arm
Screws
(with drop-safe)
4-2. Parts Replacement
Screws
(with
drop-safe)
Mechanical deck
assembly
Screws
(with drop-safe)
HN-260 board
Mechanical
deck
assembly
Guide hole
Pin of the chassis
4-117