Sony Digital Betacam DVW-707 Maintenance Manual page 179

Installation
14. Threading Gear Assembly Installation
S threading gear assembly installation
(1) Attach the S threading gear assembly to the
threading base while aligning the mark of the
S threading gear as shown in the figure.
(2) Attach the rail using the two screws.
(3) Put the flange portion are the link shaft of the S
threading gear assembly to the rail while open-
ing the groove of the rail.
T threading gear assembly installation
(1) Attach the T threading gear assembly to the
threading base while aligning the mark of the
T threading gear as shown in the figure.
DVW-790WS/709WS/707 P2V1
DVW-790WSP/709WSP/707P P2V1
Link shafts
S threading gear assembly
Mark
S threading gear assembly
Marks
S threading
gear assembly
Mark
S threading gear assembly
4-2. Parts Replacement
PWH 1.4x2.5
S rail
Marks
T threading gear
assembly
Mark
S threading gear assembly
T threading gear assembly
ST driving gear
ST driving
middle gear
Mark
T threading gear assembly
4-95