Replacing The Rotary Encoder - Sony Digital Betacam DVW-707 Maintenance Manual

3-4. Replacing the Rotary Encoder

3-4. Replacing the Rotary Encoder
1. Remove the front assembly. (Refer to Section
"3-2-1. Replacing the CCD Unit".)
2. Remove the SW-971 board. (Refer to Section
"3-3-4. Shutter Switch".)
3. Insert a flatbrade screwdriver into the clear-
ance between the rotary encoder knob and the
front switch cover assembly. And then
remove the rotary encoder knob by pushing it
out with the screwdriver.
4. Remove the three screws to remove the
SW-983 board.
5. Remove the nut and the washer to remove the
rotary encoder (SW-983 board) from the R-E
bracket.
6. Reattach the rotary encoder by reversing the
removing steps.
3-22
Rotary encoder
R-E bracket
Washer
Nut
Front switch
cover assembly
Rotary encoder knob
TP 2.6x6
SW-983 board
Flatbrade screwdriver
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1