Table of Contents
Advertisement
3-10.
S REEL TABLE ASSEMBLY,
1)
3)
4)
5)
6)
2)
T REEL TABLE ASSEMBLY
Removal (See Fig. 3-11.)
Remove the S brake and T brake as described in section 3-4.
Remove the TL holding plate as described in section 3-5.
Remove the tension regulator band assembly as described in
section 3-11.
Remove the S reel table assembly @ .
Tum the stopper @ approx. 90°
in the direction of the
arrow @ .
While sliding the LB release arm @ in the direction of the
arrow @, remove
the T reel table assembly @.
installation (See Fig. 3-11.)
i
Apply half a drop of oil to the axle @ (See Fig, A).
Move the RK gear @ in the direction of the arrow @ and the
TS brake @ in the direction of the arrow @, putting them
out of the way.
@ S Reel Table Assembly
4) Apply half a drop of oil to the axle @ (See Fig. B).
6) Mount the S reel table @ onto the axle @.
8) Mount the TL holding plate as described in section 3-5.
Oil
Oil
®
Cs)
Axle
Axle
Fig. A
Fig. B
Fig. 3-11.
—15—
Advertisement
Table of Contents
