Cr_On-Sta Command; Cr_Pointer Command; Cr_Ptimemode Command; Cr_Ptimer Command - Sanyo PLC-XM100/L - 5000 Lumens Manual

PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications

9.11.20 CR_ON-STA Command

Command "CR_ON-STA" [CR]
Details Get setting status of Power ON Start
Acceptable
Response
%1
Unacceptable

9.11.21 CR_POINTER Command

Command "CR_POINTER" [CR]
Details Get setting status of Pointer
Acceptable
Response
%1
Unacceptable

9.11.22 CR_PTIMEMODE Command

Command "CR_PTIMEMODE" [CR]
Details Get setting status of count up/down mode in P-timer
Acceptable
Response
%1
Unacceptable

9.11.23 CR_PTIMER Command

Command "CR_PTIMER" [CR]
Details Get setting status of P-timer
Acceptable
Response
%1
Unacceptable

9.11.24 CR_PTIME Command

Command "CR_PTIME" [CR]
Details Get setting time for count down mode of P-timer
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"ON" -------------------------- Power ON Start is ON
"OFF" ------------------------ Power ON Start is OFF
"Error Code" [CR]
"000_%a" [CR]
"ARROW" ---------------------Arrow Pointer mode
"FINGER" ---------------------Finger Pointer mode
"LASER" ---------------------- Dot Pointer mode
"Error Code" [CR]
"000_%a" [CR]
"COUNTUP" -------------------- Set P-timer to Count up mode
"COUNTDN" -------------------- Set P-timer to Count down mode
"Error Code" [CR]
"000_%a" [CR]
"ON" -------------------- P-timer is activated
"STOP" ---------------- P-timer is
"OFF" ------------------ Exit P-timer function
"Error Code" [CR]
"000_%a" [CR]
"001" – "180" ----------------------- 1 to 180 minutes
"Error Code" [CR]
74/79
temporarily suspended