Cr_Rsens Command; Cr_Lang Command; Cr_On-Sta Command; Cr_P-Mane Command - Sanyo PLV-WF20 - 6000 Lumens Manual

PLV-WF20 Expand Serial Command Functional Specifications

9.10.6 CR_RSENS Command

Command "CR_RSENS" [CR]
Details Get selected location of infrared remote receiver of remote control
Acceptable
Response
Unacceptable

9.10.7 CR_LANG Command

Command "CR_LANG" [CR]
Details Get selected language
Acceptable
Response
Unacceptable

9.10.8 CR_ON-STA Command

Command "CR_ON-STA" [CR]
Details Get Power ON Start setting status
Acceptable
Response
Unacceptable

9.10.9 CR_P-MANE Command

Command "CR_P-MANE" [CR]
Details Get setting status of Power management
Acceptable
Response
Unacceptable
"000_%1" [CR]
"BOTH" --------Select both front and back receiver of projector
%1 "FRONT" ----- Select only front receiver of projector
"BACK" ------- Select only back receiver of projector
"?" [CR]
"000_%1" [CR]
"ENG" -------------------------- English is selected
"DEU" -------------------------- German is selected
"FRA" -------------------------- French is selected
"ITA" ---------------------------- Italian is selected
"ESP" -------------------------- Spanish is selected
"POR" -------------------------- Portuguese is selected
%1
"NED" -------------------------- Dutch is selected
"SVE" -------------------------- Swedish is selected
"CHI" --------------------------- Chinese is selected
"KOR" -------------------------- Korean is selected
"JPN" --------------------------- Japanese is selected
"RUS" -------------------------- Russian is selected
"?" [CR]
"000_%1" [CR]
"ON" -------------------------- Power ON Start is set to ON.
%1
"OFF" ------------------------ Power ON Start is set to OFF.
"?" [CR]
"000_%1" [CR]
"OFF" ------------------------ Power Management is disabled
%1 "READY" -------------------- Power Management is set to Ready
"SHUTDOWN" -----Power Management is set to Shut Down mode
"?" [CR]
59/68