Cr_ Kystnmode Command; Cr_Cornertestpat Command; Cr_Ceil Command; Cr_Rear Command - Sanyo PLC-XM100/L - 5000 Lumens Manual

PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications

9.8.6 CR_ KYSTNMODE Command

Command "CR_KYSTNMODE" [CR]
Details Get setting status of Keystone Store Mode
Acceptable
Response
%1
Unacceptable

9.8.7 CR_CORNERTESTPAT Command

Command "CR_CORNERTESTPAT" [CR]
Details Get setting status of test pattern for Corner correction
Acceptable
Response
%1
Unacceptable

9.8.8 CR_CEIL Command

Command "CR_CEIL" [CR]
Details Get setting status of Ceiling
Acceptable
Response
%1
Unacceptable

9.8.9 CR_REAR Command

Command "CR_REAR" [CR]
Details Get setting status of Rear function
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"STR" ---------------------- Store mode is "Store"
"RST" ---------------------- Store mode is "Reset"
"?" [CR] -------------------- When unknown command is received
"000_%1" [CR]
"RED" ---------------------------- Test pattern is red
"WHITE" ------------------------- Test pattern is white
"BLUE" --------------------------- Test pattern is blue
"OFF" ------------------------- Test pattern is not displayed
"Error Code" [CR]
"000_%1" [CR]
"ON" --------------------------- Ceiling projection is enabled
"OFF" ------------------------- Ceiling projection is disabled
"Error Code" [CR]
"000_%1" [CR]
"ON" --------------------------- Rear projection is enabled
"OFF" ------------------------- Rear projection is disabled
"Error Code" [CR]
66/79