Cr_P-Manetime Command; Cr_Standbymode Command; Cr_On-Sta Command; Cr_Pointer Command - Sanyo PLC-WM4500/L - 4500 Lumens Manual

PLC-WM4500/WM4500L Expand Serial Command Functional Specifications

9.11.25 CR_P-MANETIME Command

Command "CR_P-MAETIME" [CR]
Details Get setting time for starting Power Management function
Acceptable
Response
%1
Unacceptable

9.11.26 CR_STANDBYMODE Command

Command "CR_STANDBYMODE" [CR]
Details Get setting status of Standby mode
Acceptable
Response
%1
Unacceptable

9.11.27 CR_ON-STA Command

Command "CR_ON-STA" [CR]
Details Get Direct on setting status
Acceptable
Response
%1
Unacceptable

9.11.28 CR_POINTER Command

Command "CR_POINTER" [CR]
Details Get setting status of Pointer
Acceptable
Response
%1
Unacceptable

9.11.29 CR_PTIMEMODE Command

Command "CR_PTIMEMODE" [CR]
Details Get setting status of count up/down mode in P-timer
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"001 – 030" ----------------------- 1 to 30 minutes
"Error Code" [CR]
"000_%1" [CR]
"ECO" ----------------------- Less standby electricity
"NORMAL" -------------- Normal standby electricity
"Error Code" [CR]
"000_%1" [CR]
"ON" -------------------------- Direct on is active
"OFF" ------------------------ Direct on is inactive
"Error Code" [CR]
"000_%a" [CR]
"ARROW" ---------------------Arrow Pointer mode
"FINGER" ---------------------Finger Pointer mode
"LASER" ---------------------- Dot Pointer mode
"Error Code" [CR]
"000_%a" [CR]
"COUNTUP" -------------------- Set P-timer to Count up mode
"COUNTDN" -------------------- Set P-timer to Count down mode
"Error Code" [CR]
72/78