PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications
8.10.27 CF_SHUTH Command
Command
"CF_SHUTH_%1" [CR]
"005"-"180"----------Specify setting time directly
%1
"UP" ------------------ Add 1 minute
"DN" ------------------Decrease 1 minute
Set time of operating shutter management function.
(Valid only when in the normal Power ON status)
Details
The status set by this command is stored in EEPROM and setting remains effective
even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.10.28 CF_DELAYCTRL Command
Command
"CF_DELAYCTRL_%1" [CR]
"OFF"---------- Set Video delay control to OFF
"LOW"---------- Set Video delay control to LOW
%1
"MID"---------- Set Video delay control to MID
"HIGH"---------- Set Video delay control to HIGH
Select the mode of Video delay control
(Valid only when in the normal Power ON status)
Details
The status set by this command is stored in EEPROM and setting remains effective
even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.10.29 CF_TESTPAT Command
Command
"CF_TESTPAT_%1" [CR]
"COLOR" ---------------------- Display Color bar
"GRAD1" ---------------------- Display 16step(white→black)
"GRAD2" ---------------------- Display 16step(white←black)
"GRAD3" ---------------------- Display 16step(white↓black)
"GRAD4" ---------------------- Display 16step(white↑black)
%1
"WHITE" ---------------------- Display all white
"BLACK" ---------------------- Display all black
"CROSS" --------------------- Display Cross
"OFF" ---------------------Do not show test pattern display
"UP" ---------------------- Switch forward
"DN" ---------------------- Switch backward
Execute test pattern display.
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
8.10.30 CF_FDEFAULT Command
Command
"CF_FDEFAULT_%1" [CR]
%1
"RST"
Reset to Factory Default setting
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
47/79