Cr_P-Mane Command; Cr_P-Manetime Command; Cr_Standbymode Command; Cr_On-Sta Command - Sanyo PLC-WM5500/L - 5500 Lumens Manual

PLC-WM5500/WM5500L Expand Serial Command Functional Specifications

9.11.26 CR_P-MANE Command

Command "CR_P-MANE" [CR]
Details Get setting status of Power management
Acceptable
Response
%1
Unacceptable

9.11.27 CR_P-MANETIME Command

Command "CR_P-MAETIME" [CR]
Details Get setting time for starting Power Management function
Acceptable
Response
%1
Unacceptable

9.11.28 CR_STANDBYMODE Command

Command "CR_STANDBYMODE" [CR]
Details Get setting status of Standby mode
Acceptable
Response
%1
Unacceptable

9.11.29 CR_ON-STA Command

Command "CR_ON-STA" [CR]
Details Get Direct on setting status
Acceptable
Response
%1
Unacceptable

9.11.30 CR_POINTER Command

Command "CR_POINTER" [CR]
Details Get setting status of Pointer
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"OFF" ------------------------ Power Management is disabled
"READY" -------------------- Power Management is set to Ready
"SHUTDOWN" ------------ Power Management is set to Shut
Down mode
"Error Code" [CR]
"000_%1" [CR]
"001 – 030" ----------------------- 1 to 30 minutes
"Error Code" [CR]
"000_%1" [CR]
"ECO" ----------------------- Less standby electricity
"NORMAL" -------------- Normal standby electricity
"Error Code" [CR]
"000_%1" [CR]
"ON" -------------------------- Direct on is active
"OFF" ------------------------ Direct on is inactive
"Error Code" [CR]
"000_%a" [CR]
"ARROW" ---------------------Arrow Pointer mode
"FINGER" ---------------------Finger Pointer mode
"LASER" ---------------------- Dot Pointer mode
"Error Code" [CR]
81/88