Cr_On-Sta Command; Cr_Rcode Command; Cr_Security Command; Cr_Keydis Command - Sanyo PLC-XL51 - 2700 Lumens Manual

PLC-XL51 Expand Serial Command Functional Specifications

9.11.15 CR_ON-STA Command

Command "CR_ON-STA"[CR]
Details Get Power ON Start setting status
Acceptable
Response %a
Unacceptable
9.11.16

CR_RCODE Command

Command "CR_RCODE"[CR]
Details Get selected Remote Control Code
Acceptable
Response %a
Unacceptable

9.11.17 CR_SECURITY Command

Command "CR_SECURITY" [CR]
Details Get Security Mode setting status
Acceptable
Response %1
Unacceptable

9.11.18 CR_KEYDIS Command

Command "CR_KEYDIS"(CR)
Details Get disability status of RC/Projector keys (valid or invalid)
Acceptable
Response %a
Unacceptable
"000_%a"[CR]
"ON" -------------------------- Power ON Start is ON
"OFF" ------------------------ Power ON Start is OFF
"?"[CR]
"000_%a"[CR]
"001" --------------------------- Code1 is selected
"002" --------------------------- Code2 is selected
"003" --------------------------- Code3 is selected
"004" --------------------------- Code4 is selected
"005" --------------------------- Code5 is selected
"006" --------------------------- Code6 is selected
"007" --------------------------- Code7 is selected
"008" --------------------------- Code8 is selected
"?"[CR]
"000_%1[CR]
"ON" ------------- PJ Lock setting on Menu is ON-1 or ON-2
"OFF" ------------PJ Lock setting on Menu is OFF
"Error Code" [CR]
"000_%a"[CR]
"NONE" -------------------------- RC / Projector keys are valid
"RC" ------------------------------ RC keys are invalid
"KEY" ----------------------------- Projector keys are invalid
"?"[CR]
57/63