Cr_Shutkeyprot Command; Cr_Shuth Command; Cr_Delayctrl Command; Cr_Testpat Command - Sanyo PLC-XM100/L - 5000 Lumens Manual

PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications

9.11.30 CR_SHUTKEYPROT Command

Command "CR_SHUTKEYPROT" [CR]
Details Get status if Shutter can be controlled by key on the top panel
Acceptable
Response
Unacceptable

9.11.31 CR_SHUTH Command

Command "CR_SHUTH" [CR]
Details Get time setting to start the shutter management
Acceptable
Response
Unacceptable

9.11.32 CR_DELAYCTRL Command

Command "CR_DELAYCTRL" [CR]
Details Get setting status of Video delay control
Acceptable
Response
Unacceptable

9.11.33 CR_TESTPAT Command

Command "CR_TESTPAT" [CR]
Details Get setting status of Test pattern
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"ON" ------------- Shutter is not controllable by key on the top panel
%1
"OFF" ------------ Shutter is controllable by key on the top panel
"Error Code" [CR]
"000_%1" [CR]
"005" -------------------- 5 minutes
"006" -------------------- 6 minutes
%1
:
"179" -------------------- 179 minutes
"180" -------------------- 180 minutes
"Error Code" [CR]
"000_%1" [CR]
"OFF"---------- Set Video delay control to OFF
"LOW"---------- Set Video delay control to LOW
%1
"MID"---------- Set Video delay control to MID
"HIGH"---------- Set Video delay control to HIGH
""Error Code" [CR]
"000_%1" [CR]
"COLOR" ---------------------- Color bar is displayed
"GRAD1" ---------------------- 16step(white→black) is displayed
"GRAD2" ---------------------- 16step(white←black) is displayed
"GRAD3" ---------------------- 16step(white↓black) is displayed
"GRAD4" ---------------------- 16step(white↑black) is displayed
"WHITE" ---------------------- All white is displayed
"BLACK" ---------------------- All black is displayed
"CROSS" --------------------- Cross is displayed
"OFF" ---------------------Test pattern display is not displayed
"Error Code" [CR]
76/79