PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications
8.8 Lamp Command
8.8.1 CF_LAMPMODE Command
Command
"CF_LAMPMODE_%1" [CR]
"NORMAL" ------------------------ Set Lamp status to Normal mode
"ECO1" ------------------------------- Set Lamp status to Eco1 mode
%1
"ECO2" ------------------------------- Set Lamp status to Eco2 mode
"AUTO" ----------------------------- Set Lamp status to Auto mode
Select Lamp mode (Available only in the normal Power ON status)
Details
The value set by this command is stored in EEPROM and the setting remains
effective after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.8.2 CF_LAMPLIFECONTRL_ Command
Command
"CF_LAMPLIFECONTRL_%1" [CR]
"MODE1" ------------------------------- Set Lamp life control to Mode 1
%1
"MODE2" ------------------------------- Set Lamp life control to Mode 2
Select Lamp life control function (Available only in the normal Power ON status)
Details
The value set by this command is stored in EEPROM and the setting remains
effective after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
37/79