Figure 002-3 Instruction For Anchor Bolt; Nap - NEC NEAX 2000 IVS Installation Manual

NAP 200-002

Sheet 3/3
Marking and Drilling
3. Drilling
• Drilling and installing anchor bolts
(1) DRILL A HOLE IN THE CONCRETE WITH A
DRILL SUITABLE FOR A PLUG BOLT A LITTLE
DEEPER THAN THE PLUG BOLT LENGTH.
(2) INSERT THE ANCHOR BOLT INTO THE HOLE.
(3) PUSH ANCHOR BOLT UNTIL THE
BOLT STAYS PERMANENTLY IN PLACE.
(4) TURN BOLT COUNTERCLOCKWISE AND
REMOVE.
CHAPTER 3
Page 22
Revision 2.0

Figure 002-3 Instruction for Anchor Bolt

ND-45492 (E)
(1) (2) (3) (4)