Normal Use Example (Default); Flash Erase Disabled Example - Freescale Semiconductor 802.15.4/Zigbee Reference Manual

3.2.1 Normal Use Example (Default)

Normal use example (default).
"Bootloader EVK_PTC_Demo.s19 /C:COM2 /B:19200 /-E /-A /-O /-S"
It is not possible to edit NVM data with the CMD version.

3.2.2 Flash Erase Disabled Example

Flash erase disabled example.
"Bootloader EVK_PTC_Demo.s19 /C:COM2 /B:19200 /E /-A /-O /-S "
The flash is not erased and a flash programming error is detected at
address 0xEFFE. This is the address of the Embedded Bootloader control
flags, which was not erased. The error message is expected.
Freescale Semiconductor
Figure 10 Command Line Version (Using Several Options)
Figure 11 Command Line Version (Flash Erase Disable Option)
Embedded Bootloader Reference Manual, Rev. 0.0
NOTE
NOTE
3-9