Ported Targets - Freescale Semiconductor 802.15.4/Zigbee Reference Manual

1.1.1 Ported Targets

The Embedded Bootloader must be ported (I/O mapped) to a specific PCB for proper functionality and is
currently ported to the following Freescale PCBs:
Axiom AXM-0308:
PC Communication Interface:
Safe Mode Boot
Version Number
DIG528-2 EVK
PC Communication Interface:
Safe Mode Boot
Version Number
DIG536-2 SARD
PC Communication Interface:
Safe Mode Boot
Version Number
RD01
PC Communication Interface:
Safe Mode Boot
Version Number
The generic RD01 target can be used with any PCB using the Freescale
Reference Design version 01 I/O layout. The PCB must support at least
one communication interface. If a USB is the only interface, use a
jumper to short SCI pins 2 and 3 to make Safe Mode Boot available.
Refer to Section 6.3 for details on how to port the Embedded Bootloader to a specific PCB.
1-2 Embedded Bootloader Reference Manual, Rev 0.0
RS232/UART on COM1 (SCI1)/
RS232/UART on COM2 (SCI2)
Short pins 2-3 on COM1 (SCI1)/
COM2 (SCI2)
"AX-0308 Ver 5.01"
RS232/UART on COM1 (SCI1)/
USB (SCI2)
Short pins 2-3 on COM1-port (SCI1)
"528&536 Ver 5.01"
RS232/UART on COM1 (SCI1)
Short pins 2-3 on COM1-port (SCI1)
"528&536 Ver 5.01"
RS232/UART/USB on COM1 (SCI1)/
RS232/UART/USB on COM2 (SCI2)
Short pins 2-3 on COM1 (SCI1)/
COM2 (SCI2)
" RD01 Ver 5.01"
NOTE
Freescale Semiconductor