Brocade M5424 Fc8 I/O Module - Dell PowerEdge M620 Owner's Manual

Table 1-22. Fibre Channel Pass-Through Indicators
Indicator Type Pattern
Fibre Channel Green off, amber
Port LEDs off
with Qlogic
Green off, amber
mezzanine
on
card Installed
Green on, amber
off
Green off, amber
flashing
Green flashing,
amber off
Green flashing
and amber
flashing at same
time
Green flashing
and amber
flashing at
different intervals
Off/amber
flashing (twice
per second)

Brocade M5424 FC8 I/O Module

The Brocade M5424 I/O module includes eight external autosensing Fibre
Channel ports (four ports are enabled in the standard configuration and four
additional ports may be enabled as an optional upgrade), 16 internal ports,
and one serial port with an RJ-45 connector. The external Fibre Channel ports
operate at 8 Gb/sec, 4 Gb/sec, or 2 Gb/sec.
NOTE:
CMC firmware version 1.3 is required to support FC8 mezzanine cards and
I/O modules.
NOTE:
This Fibre Channel switch module includes Short Wave Small Form Factor
Pluggable (SFP) optical transceivers. To ensure proper functionality, use only SFPs
provided with this module.
(continued)
Description
Power off
Online, 1 Gb or 2 Gb link
Online, 4 Gb link
I/O activity, 1 Gb or 2 Gb
I/O activity, 4 Gb
Loss of synchronization
Firmware error
Connection has lost synchronization.
About Your System
95