Cisco Ethernet Switch - Dell PowerEdge M620 Owner's Manual

Table 1-21. Cisco SFS M7000e Infiniband Switch Indicators
Indicator Type Pattern
Module status Off
indicator
Blue on
Amber on or
blinking
Module power Off
indicator
Green

Cisco Ethernet Switch

Your system supports three Cisco Catalyst Blade Switch (CBS) versions:
• The Cisco 3130G-S switch includes four 10/100/1000 Mb Ethernet uplink
ports and two Stackwise Plus ports.
• The Cisco CBS 3130X-S switch includes four 10/100/1000 Mb Ethernet
uplink ports, two 10 Gb uplink ports, and two Stackwise Plus ports.
• The Cisco CBS 3032 switch includes four 10/100/1000 Mb Ethernet
uplink ports.
The two option bays support the following module options:
• Cisco X2 10 Gb transceiver modules (CBS 3130X-S only)
• Cisco TwinGig converter modules
All three switches include a RJ-45 console connector for switch management.
Sixteen internal Gb Ethernet connectors link to the blades in the enclosure.
See Figure 1-32.
For additional information about the Cisco CBS Ethernet switch modules,
see the documentation that shipped with the module. For general
information on installing this module, see "I/O Modules" on page 296.
Description
Switch is not ready
Switch operating normally
Fault condition in module
Power to the module is off
Module has power
(continued)
About Your System
77